Stanley STDH7213C, Original Instructions Manual, Page: 9 / 22

9
ENGLISH
(Original instructions)
Maintenance
The STANLEYcord / cordless appliance / tools are of
sophisticated design, can be used for a long time, and only
little maintenance is needed. To obtain consistent
satisfactory use, proper maintenance and regular cleaning of
the tools are necessary.
Warning! Before performing any maintenance work on the
cord / cordless electric tools, the following points must be
implemented:
• Switch off the power of the equipment / tools and pull off
the plug;
• If the equipment / tools are equipped with independent
battery pack, please turn off the power and remove the
battery pack from the equipment / tools.
• If the equipment / tools are equipped with an integrated
battery, please run out the battery, before turning off its
power.
• Before the cleaning, unplug the charger plug from the
power source. In addition, except the regular cleaning on
your charger, no other maintenance is needed.
• Regularly use the soft brush or dry cloth to clean the
ventilation slot of the equipment / tools / charger.
• Regularly use a damp cloth to clean the motor housing.
Please do not use any abrasive cleaning agents or
solvent-based cleansing agents.
• Regularly open the clamping chuck and tap it gently to
remove any internal dust (after installation).
Cleaning
Warning! Once the visible dust build-up is found
at and/or around the ventilating ports,
immediately flush the dust and powder within the
host shell with clean dry air. To perform this procedure, wear
the approved safety equipment and dust mask.
Warning! It is strictly forbidden to clean the
non-metallic parts of the tool with the solvents or
other irritant chemicals. These chemicals may
weaken the materials of these components. Use a cloth
moistened with a mild soapy water to clean it. Do not let any
substance permeate into the tool and.do not immerse any
part of the tool into a liquid.
Service Information
STANLEY offers a full network of company-owned and
authorized service locations throughout Asia. All STANLEY
Service Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool
service.Whether you need technical advice, repair, or
genuine factory replacement parts, contact the STANLEY
location nearest to you.
Notes
• STANLEY’s policy is one of continuous improvement to
our products and, as such, we reserve the right tochange
product specifications without prior notice.
• Standard equipment and accessories may vary by
country.
• Product specifications may differ by country.
• Complete product range may not be available in all
countries. Contact your local STANLEY dealers for range
availability.
Impact Drill STDH7213C
Voltage V 220-240
Frequency Hz 50/60
Power input W 720
No-load speed /min 0-3000
Impact rate IPM 0-54000
Reverse/Forward rotation Yes
Chuck capacity mm 1.5-13
Max capacity
Concrete mm 16
Metal mm 13
Wood mm 32
Weight kg 2.5
Technical data
L
pA
(sound pressure) dB(A) 100,5
K
pA
(sound pressure uncertainty) dB(A) 3
L
WA
(sound power) dB(A) 111,5
K
WA
(sound power uncertainty) dB(A) 3
Vibration emission value a
h
Check (chiselling)
a
h,ID
= m/s² 15,0
a
h,D
= m/s² 6,1
Uncertainty K = m/s² 1.5