1
7
4.3 Operat
ing
on
a
s
lope
1.
contact with the ground when
Adjust climbing wheels to avoid
climber running on flat ground or
as shown position in the picture.
2. Tilt
machine back
and keep
the
balance.
3.
Operator is located
towards
the top of machine with
slope
relative to climb
ing
down
motion
. Heavier
materials
and
larger
inclines may require an
additional operator for further
support.
4.
Operator is located
at the top
of the machine with the
slope
relative to climb
ing upwards.
Note: Be sure to turn off the power switch during slope operation to
jolting.
