Stanley SCSS-700VS, Installation & Operation Manual

Page: 27 / 74

Installation
53796 3-11
3. Attach strain relief clip to microphone cord. The strain relief clip should have about 2-¾”
of micro phone cord through it. See Figure 3-11.
Figure 3-11 Installing Strain Relief Clip
4. Push the strain into the hole in the dead front panel.
3.6.4 To Remove the VIP-VCM
To remove the VIP-VCM follow these steps:
1. Remove AC power and disconnect batteries from the main control panel.
2. Disconnect the SBUS connections from the SBUS terminals on the VIP-VCM. See Figure
3-8.
3. Disconnect any devices connected to the VBUS. See Figure 3-6.
2-3/4”