6
7
WARNING
Do not attempt to modify the chainsaw in any way; this will VOID your warranty.
The use of any attachment or accessory other than those recommended in this instruction manual could result in damage to the
chainsaw and could cause injuries to the operator.
This petrol chainsaw complies with Australian / New Zealand and International standards and safety requirements. Repairs
should only be carried out by qualified persons using original spare parts. Failure to do so may result in considerable danger to
the operator.
MAINTAIN YOUR CHAINSAW WITH CARE
When not using your chainsaw ensure the fuel cock is
‘OFF’. Never leave the fuel cock ‘ON’ as this can damage
the carburettor. Follow the instructions for lubricating and
changing accessories. Keep handles clean, dry and free from
oil and grease. Ensure that ventilation slots are kept clean and
free from dust at all times. Blocked ventilation slots can cause
overheating and damage to the motor. Ensure that the air and
fuel filters are kept clean at all times.
MAINTAIN THE SAW IN GOOD WORKING
ORDER
Have all chainsaw service performed by a qualified service
dealer with the exception of the items listed in the maintenance
section of this manual. For example: if improper tools are used
to remove or hold the flywheel when servicing the clutch,
structural damage to the flywheel can occur and cause the
flywheel to burst.
Make certain the saw chain stops moving when the throttle
trigger is released. If it does not, do not use until serviced by a
qualified service dealer.
1. Never modify your saw in any way.
2. Keep the handles dry, clean and free of oil or fuel mixture.
3. Keep fuel and oil caps, screws and fasteners securely
tightened.
4. Use only qualified accessories and replacement parts as
recommended
REMOVE ADJUSTING KEYS & WRENCHES
Form the habit of always checking to see that any adjusting keys
or wrenches have been removed from the chainsaw before
operating.
FIRE PRECAUTIONS
Always contact your fire authority before using the pressure
washer on fire restricted days. It is not recommended to use
your chainsaw when a total fire ban is in force. Never refuel
your chainsaw while it is still running. As a precaution it is
recommended that an expert is consulted on obtaining and
using a suitable fire extinguisher.
CLEANING YOUR CHAINSAW
Always stop your chainsaw before you commence cleaning.
Always ensure that your chainsaw has cooled, about one
(1) hour, before cleaning and storing. When cleaning your
chainsaw use only a damp soft cloth. NEVER use liquid or
solvents of any type.
RISK OF DAMAGE
Damage may occur if nozzle is used too close to appliance
being cleaned. Always trial test the chainsaw on an
inconspicuous part of the appliance. Beware poor paint and
rust as the water will lift poor paint and cause rust spots to
grow. Damage caused by chainsaw is not covered by warranty.
CHECK DAMAGED PARTS
Before using the chainsaw it should be carefully checked to
determine that it will operate properly and perform its intended
function.
Check for broken or missing parts and have them replaced or
repaired at an authorised service facility. Check any other
condition that may affect the operation of the chainsaw. A
guard or any other part of the chainsaw that is damaged should
be properly repaired or replaced by an authorised service
facility unless otherwise indicated in this instruction manual.
Any switch that does not operate correctly must be replaced by
an authorised service facility.
DO NOT use the chainsaw if the ‘ON / OFF’ motor switch
does not turn the chainsaw ‘ON’ and ‘OFF’.
DO NOT use the chainsaw if the chain brake does not
operate correctly.
Do not operate a chain saw that is damaged, improperly
adjusted, or not completely and securely assembled.
Always replace bar, chain, hand guard or chain brake
immediately if it becomes damaged, broken or is otherwise
removed.
Summary of Contents for PG6133
Page 16: ...16 PIC 11 ...