2
3
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not approved by the party responsible for compliance could void user’s authority to operate the equipment.
GENERAL SAFETY WARNINGS AND INSTRUCTIONS
READ ALL INSTRUCTIONS
WARNING: Read all instructions before operating spotlight. Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
SAFETY GUIDELINES / DEFINITIONS
DANGER:
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING:
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION:
Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in
property damage.
RISK OF UNSAFE OPERATION.
When using tools or equipment, basic safety precautions should always be followed to reduce the
risk of personal injury. Improper operation, maintenance or modification of tools or equipment could result in serious injury and
property damage. There are certain applications for which tools and equipment are designed. Manufacturer strongly recommends
that this product NOT be modified and/or used for any application other than for which it was designed. Read and understand all
warnings and operating instructions before using any tool or equipment.
IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, EXPOSURE TO EXCESSIVE
UV RADIATION, OR INJURY TO PERSONS
Lighted lamp is HOT.
WARNING – To reduce the risk of FIRE, ELECTRIC SHOCK, EXPOSURE TO EXCESSIVE UV RADIATION, OR INJURY TO
PERSONS:
• HID bulb gets HOT quickly! Only contact switch/plug when turning on.
• Do not touch the HID bulb at any time.
• Do not touch hot lens or enclosure.
• Do not remain in light if skin feels warm.
• Do not operate the spotlight with a missing or damaged lens or enclosure.
WARNING – WHEN USING ELECTRICAL APPLIANCES, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING
THE FOLLOWING:
• To reduce the risk of injury, close supervision is necessary when the spotlight is used near children.
• Use only attachments recommended or sold by the manufacturer.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK:
• Do not put spotlight in water or other liquid. Do not place or store appliance where it can fall or be pulled into a tub or sink.
• Do not clean this appliance with a water spray or the like.
• Use only the charger supplied by the manufacturer to recharge.
• When an extension cord is used:
– The marked rating of the detachable power supply cord or extension cord should be at least as great as the electrical rating of
this appliance.
FEATURES
CARACTERÍSTICAS
FEATURES
1. Battery/charge status LED indicator (back of unit)
2. AC-to-DC charging port (back of unit) (for use with AC
charging adapter)
3. 12 volt DC power and charging port (back of unit) (for use
with 12 volt DC adapter)
4. On/Off trigger
5. Trigger lock
6. 12V DC plug storage (bottom of the handle)
7. Detachable 12V DC power and charging cord and plug
8. 120 volt AC charger
CARACTERÍSTICAS
1. Indicador LED del estado de la batería/carga (posterior de
la unidad)
2. Puerto de carga CA-a-CC (posterior de la unidad) (para el
uso con el adaptador de carga CA)
3. Puerto de 12 voltios CC para la energía y cargar
(posterior de la unidad) (para el uso con el adaptador de
12 voltios CC)
5. Disparador de encendido/apagado
6. Almacenaje para el enchufe de 12V CC (parte inferior de la
manija)
7. Cuerda eléctrico y enchufe de 12V CC desmontables
8. Cargador de la CA de 120 voltios
4
5
6
3
2
1
BACK OF UNIT
PARTE POSTERIOR DE LA UNIDAD
BOTTOM OF UNIT
PARTE INFERIOR DE LA UNIDAD
8
7
HIDC10_ManualENSP_090910.indd 3-4
9/9/2010 12:12:00 PM
