Stanley FATMAX V20 LITHIUM ION SFMCBL730, Original Instructions Manual, Page: 8 / 16

8
ENGLISH (Original instructions)
Vibration
The declared vibration emission values
stated in the technical data and the
declaration of conformity have been
measured in accordance with a standard
test method provided by EN60335 and
may be used for comparing one tool with
another.
The declared vibration emission value
may also be used in a preliminary
assessment of exposure.
Warning! The vibration emission value
during actual use of the power tool can
differ from the declared value depending
on the ways in which the tool is used.
The vibration level may increase above
the level stated.
When assessing vibration exposure to
determine safety measures required by
2002/44/EC to protect persons regularly
using power tools in employment, an
estimation of vibration exposure should
consider, the actual conditions of use and
the way the tool is used, including taking
account of all parts of the operating cycle
such as the times when the tool is
switched off and when it is running idle in
addition to the trigger time.
Safety of Others
The appliance is only to be used with the
power supply unit recommended for this
appliance.
u
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been
given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
u
Do not use when people, especially
children or pets are nearby.
Children should be supervised to ensure
that they do not play with the appliance.
Residual risks
Additional residual risks may arise when
using the tool which may not be included
in the enclosed safety warnings. These
risks can arise from misuse, prolonged
use, etc.
Even with the application of the relevant
safety regulations and the
implementation of safety devices, certain
residual risks can not be avoided. These
include:
u
Injuries caused by touching any
rotating/moving parts.
u
Injuries caused when changing any
parts, blades or accessories.
u
Injuries caused by prolonged use of a
tool. When using any tool for
prolonged periods ensure you take
regular breaks.
u
Impairment of hearing.
u
Health hazards caused by breathing
dust developed when using your tool
(example:- working with wood,
especially oak, beech and MDF.)