8
ENGLISH
(Original instructions)
Note:
When attaching or replacing the belt hook (9), use only
the screw (8) that is provided. Be sure to securely tighten the
screw.
The belt hook (9) can be be attached to either side of the tool
using only the screw (8) provided, to accommodate left- or
right- handed users. If the hook is not desired at all, it can be
removed from the tool.
To move the belt hook, remove the screw (8) that holds the
belt hook (9) in place then reassemble on the opposite side.
Be sure to securely tighten the screw (8).
The belt hook (9) can be be attached by sliding into the
slots (10) on either side of the tool using only the screw (8)
provided, to accommodate left- or right- handed users. If the
hook is not desired at all, it can be removed from the tool.
e
Note:
Various trackwall hooks and storage configurations are
available.
Please visit our website www.stanley.eu/3 for further
information.
Switching on and off (Fig. H)
u
To switch the torch on press in the switch (1)
u
To switch the torch off press in the switch (1)
The pivoting head (Fig. H)
u
For your convienience, the pivoting head (4) can be
rotated in 6 positions from 0º - 140º.
Maintenance
Your STANLEY FATMAX tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning!
Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
u
Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
u
Regularly open the chuck and tap it to remove any dust
from the interior.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Further information is available at www.2helpU.com.
Technical data
SFMCL050 (H1)
Voltage
V
DC
18
This tool is a Bare unit but can be used with the chargers in
the following table.
Charger
SFMCB11
SFMCB12
SFMCB14
Input Voltage
V
AC
230
230
230
Output Voltage
V
DC
18
18
18
Current
A
1.25
2
4
This tool is a Bare unit but can be used with the batteries in
the following table.
Battery
SFMCB201 SFMCB202
SFMCB204 SFMCB206
Voltage
V
DC
18
18
18
18
Capacity
Ah
1.5
2.0
4.0
6.0
Type
Li-Ion
Li-Ion
Li-Ion
Li-Ion
Guarantee
STANLEY FATMAX is confident of the quality of its products
and offers consumers a 12 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area.
To claim on the guarantee, the claim must be in accordance
with STANLEY FATMAX Terms and Conditions and you will
need to submit proof of purchase to the seller or an authorised
repair agent. Terms and conditions of the STANLEY FATMAX
1 year guarantee and the location of your nearest authorised
repair agent can be obtained on the Internet at www.2helpU.
com, or by contacting your local STANLEY FATMAX office at
the address indicated in this manual.
Please visit our website www.stanley.eu/3 to register
your new STANLEY FATMAX product and receive updates on
new products and special offers.
