9
English
Package Contents
The package contains:
1 Blower motor housing
1 Blower tube (2 Pieces)
1 Battery (Only included with SFMCBL7M1)
1 Charger (Only included with SFMCBL7M1)
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Do not expose the tool to rain or high humidity
or leave outdoors while it is raining.
Switch the tool off. Before performing any
maintenance on the tool, remove the battery
from the tool.
Keep people and animals at least 6 m away
from the work area.
Keep bystanders away.
99
Directive 2000/14/EC guaranteed sound power.
Date Code Position (Fig. J)
The date code
8
, which also includes
the year of manufacture,
is printed into the housing.
Example:
2019 XX XX
Year of Manufacture
Description (Fig. A)
WARNING:
Never modify the power tool or any part of it.
Damage or personal injury could result.
1
Variable speed trigger
2
Boost button
3
Handle
4
Upper tube
5
Lower tube
6
Battery (Only included with SFMCBL7M1)
7
Battery release button
Intended Use
Your blower has been designed for professional sweeping and
blowing applications.
DO nOT
use under wet conditions or in the presence of
flammable liquids or gases.
DO nOT
let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm.
This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories.
An accidental
start-up can cause injury.
WARNING:
Use only STANLEY FATMAX battery packs
and chargers.
Inserting and Removing the Battery Pack
from the Tool (Fig. B)
nOTE:
Make sure your battery pack
6
is fully charged.
To Install the Battery Pack into the Tool
1. Align the battery pack
6
with the rails inside the tool
(Fig. B).
2. Slide it into the tool until the battery pack is firmly seated
and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the Tool
1. Press the release button
7
and firmly pull the battery pack
out of the tool handle (Fig. B).
2. Insert battery pack into the charger as described in the
charger section of this manual.
Summary of Contents for FATMAX SFMCBL7
