8
ENGLISH
(Original instructions)
Replacing diamomnd shaped tip (Fig. G)
u
Replace the diamond shaped tip (9).
u
Replace and tighten screw (10).
Fitting and removing the dust cassette (Fig. H)
u
Slide the dust cassette (2) onto the connector (2a) and
make sure that it is securely located.
u
To remove the dust casette, pull it to the rear and away
from the rear end of the tool.
Use
Warning!
Let the tool work at its own pace. Do not overload.
Switching on and off
u
To switch the tool on, depress the on/off switch (1) at the
forward position I.
u
To switch the tool off, depress the on/off switch (1) at the
back position O.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Warning!
Before performing any maintenance, switch off and
unplug the tool or remove the battery pack.
u
Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
Protecting the environment
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
FMCW210
Input voltage
V
dc
18
Oscillations (no load)
min
-1
12000
Orbits (no load)
min
-1
12000
Sanding base surface
mm
2
8866
Weight
kg
0.88
Battery
FMC687L
Voltage
V
DC
18
Capacity
Ah
2.0
Type
1
Charger
90608625
Input voltage
V
AC
230
Output voltage
V
DC
18
Current
mA
2000
L
pA
(sound pressure)
68
dB(A), Uncertainty (K)
3
dB(A)
L
WA
(sound power)
79
dB(A), Uncertainty (K)
3
dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Vibration emission value (main handle) (a
h
) 5,9 m/s
2
, uncertainty (K) 1,5 m/s
2
Vibration emission value (aux. handle) (a
h
) 7,3 m/s
2
, uncertainty (K) 1,5 m/s
2
EC declaration of conformity
MACHINERY DIRECTIVE
%
FMCW210
-
Sander
Stanley Europe declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-
4:2009+A11:2011
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact Stanley
Fat Max at the following address or refer to the back of the
manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Black & Decker.
R. Laverick
Director of Engineering
Stanley Europe, Egide Walschaertsstraat14-18,
2800 Mechelen, Belgium
23/08/2017
