Stanley FATMAX FMCR001, Manual

Page: 9 / 104

9
ENGLISH (Original instructions)
To program the channels:
u
Turn power ON.
u
Press the mode button (2) until the desired mode is
selected (AM or FM).
u
Tune the radio to the desired station (read tune or
Seek function).
u
Press the set preset button (3). The “Mem” icon will flash
in the LCD (5).
u
Press the “1-6” preset toggle button (3) to scroll through
the 6 presets.
u
Once it displays the desired preset number, press the set
preset button.
u
Repeat steps 3 through 6 to set the other memory buttons.
Equalizer button
To set the bass and treble:
u
Press the equalizer button (6) once. The bass equalizer
will appear on the LCD (5).
u
Rotate the ON/OFF - volume dial (1) to set the desired
bass level.
u
Press the equalizer button a second time to get to the
treble equalizer.
u
Rotate the ON/OFF - Volume dial (1) to set the desired
treble level.
u
Press the equalizer button a third time to exit.
Note: If you do not press a button within 5 seconds, the
equalizer programming feature will automatically be set to
the new setting.
Important radio notes
u
Reception will vary depending on location and strength
of radio signal.
u
Certain generators may cause background noise.
u
AM reception will most likely be clearer when powered
by a battery pack.
Auxiliary port
To use the auxiliary port (15), plug the output jack from
a phone, CD or MP3 player into the auxillary port (cord
sold seperately).
The sound from the external source plays through the
speakers. The radio will not automatically switch to AUX Mode
when an input source is detected. The mode (2) button needs
to be set to the "AU" function.
Troubleshooting
Problem Possible cause Possible solution
Unit will not turn
ON.
Battery pack not
installed properly
Check battery pack
installation.
Battery pack not
charged.
Check battery pack
charging
requirements.
Internal componets
too hot.
Allow tool to cool
down.
Cord not plugged in. Plug tool into a
working outlet
Cord or switch is
damaged.
Have cord or switch
replaced
at an authorized
Stanley Fat Max
service center.
Battery pack will not
charge.
Battery pack not
inserted into
charger.
Insert battery pack
into charger until
LED illuminates.
Charger not plugged
in.
Plug charger into a
working outlet.
Refer to "Important
charging notes" for
more details.
Surrounding air
temperature
too hot or too cold.
Move charger and
battery pack to a
surrounding air
temperature of
above 4,5°C or
below 40,5°C.
Unit shuts off
abruptly.
Battery pack has
reached its
maximum thermal
limit.
Allow battery pack
to cool down.
Out of charge. (To
maximize the life of
the battery pack it is
designed to shut off
abruptly when the
charge is depleted.)
Place on charger
and allow to charge.
Maintenance
Your Stanley Fat Max corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool/appliance care and regular
cleaning.
Warning! Switch off and unplug the appliance before carrying
out any cleaning.
u
Dirt and grease may be removed from the exterior of the
appliance using a cloth.
Warning! NEVER use solvents or other harsh chemicals for
cleaning the non-metallic parts of the appliance. These