Stanley FATMAX FMC761, Original Instructions Manual

Page: 13 / 172

13
ENGLISH (Original instructions)
z
Separate collection of used products and packag-
ing allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
Stanley Europe provides a facility for the collection and
recycling of Stanley Fat Max products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Stanley Europe office at
the address indicated in this manual. Alternatively, a list of
authorised Stanley Europe repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
Z
Stanley Fat Max batteries can be recharged many
times. At the end of their useful life, discard batter-
ies with due care for our environment:
u
Run the battery down completely, then remove it from the
tool.
u
NiCd, NiMH and Li-Ion batteries are recyclable. Take them
to any authorised repair agent or a local recycling station.
Technical data
FMC761 (H1)
Voltage V
dc
18
No-load speed min
-1
8,500
Disc diameter mm
125
Disc bore mm
22
Max disc thickness
grinding discs mm
6
cutting discs mm
3.5
Spindle diameter
M14
Spindle length (with the
inner flange fitted)
mm
14
Spindle length (without the
inner flange fitted) mm
19.5
Weight kg 2.9
Charger FMC690L typ. 1
Input Voltage
V
AC
220-240
Output Voltage V
DC
20 (Max)
Current A 2
Approx. charge time min
120
Battery FMC688L
Voltage
V
DC
18
Capacity Ah 4.0
Type Li-Ion
L
pA
(sound pressure) 80.5 dB(A), Uncertainty (K) 3 dB(A)
L
WA
(sound power) 91.5 dB(A), Uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Surface grinding (a
h,SG
) 3.9 m/s
2
, uncertainty (K) 1.5 m/s
2
Polishing (a
h,P
) 2.0 m/s
2
, uncertainty (K) 1.5 m/s
2
Disc sanding (a
h,DS
) 4.5 m/s
2
, uncertainty (K) 1.5 m/s
2
Caution! Applications such as cutting-off or wire brushing may
have different vibration emissions.