Stanley FATMAX FMC625 H1, Original Instructions Manual

Page: 8 / 96

8
ENGLISH (Original instructions)
You can check the location of your nearest authorised repair
agent by contacting your local Stanley Europe ofice at the
address indicated in this manual. Alternatively, a list of
authorised Stanley Europe repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
Z
Stanley Fat Max batteries can be recharged many
times. At the end of their useful life, discard batteries
with due care for our environment:
u
Run the battery down completely, then remove it from the
tool.
u
NiCd, NiMH and Li-Ion batteries are recyclable. Take them
to any authorised repair agent or a local recycling station.
Technical data
FMC625 (H1)
Voltage V
DC
18
No-load speed Min
-1
0-400/0-1600
Max. torque Nm 51.4
Chuck capacity mm 13
Max Drilling capacity
Steel/wood/
masonry
mm 13/38/13
Charger 905998**
typ. 1 906086**
typ. 1
Input Voltage V
AC
230 230
Output Voltage V
DC
18 18
Current A 1 2
Approx. charge time min
90 - 240 45 - 120
Battery FMC685L FMC687L FMC688L
Voltage V
DC
18 18 18
Capacity Ah 1.5 2.0 4.0
Type Li-Ion Li-Ion Li-Ion
Level of sound pressure according to EN 60745:
Sound pressure (L
pA
) 88.1 dB(A), uncertainty (K) 3 dB(A)
Sound power (L
WA
) 99.1 dB(A), uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Impact drilling into concrete (a
h, ID
) 13.1 m/s
2
, uncertainty (K) 1.5 m/s
2
Drilling into metal (a
h, D
) < 2.5 m/s
2
, uncertainty (K) 1.5 m/s
2
Screwdriving without impact (a
h, s
) < 2.5 m/s
2
, uncertainty (K) 1.5 m/s
2
EC declaration of conformity
MACHINERY DIRECTIVE
%
Cordless hammer drill - FMC625
Stanley Europe declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-1
These products also comply with Directive
2004/108/EC and 2011/65/EU. For more information, please
contact Stanley Europe at the following address or refer to the
back of the manual.
The undersigned is responsible for compilation of the technical
ile and makes this declaration on behalf of Stanley Europe.
_
Kevin Hewitt
Vice-President Global Engineering
Stanley Europe, Egide Walschaertsstraat14-18,
2800 Mechelen, Belgium
22/04/2014