EX5500 Controller Installation & Configuration Guide
15
Note
Each slave must be connected directly to the network and configured
the following parameters configured before being connected to the
MASTER:
•
Transmission Range: Select the desired transmission range of
the slave Exciter so that the LF coverage is sufficient and some
overlap exists between the chained Exciters' LF coverage
•
Connected to network: Make sure the Connected to network
checkbox is unchecked.
•
Chaining and External Connections: Check the Exciter is Slave
Checkbox
Resetting the EX5500 Controller IP Address
You can reset the EX5500 Controller’s IP address to the factory default value. The
default IP address is 192.168.1.178.
•
Press the
IP Reset button
with a ballpoint pen for 5 second.
After a successful IP reset, a red LED indication appears for two seconds.
