2
77-117
3
77-117
Carefully read the Safety Instructions and User Manual before using this product. The person
responsible for the instrument must ensure that all users understand and adhere to these
instructions.
Retain this manual for future reference.
IMPORTANT:
The following labels are on your laser tool for your convenience and safety.
They indicate where the laser light is emitted by the level.
ALWAYS BE AWARE
of their
location when using the level.
DO NOT
remove any warning label(s) on the housing. This instrument must only be used for
leveling and layout tasks as outlined in this manual.
ALWAYS
make sure that any bystanders in the vicinity of use are made aware of the
dangers of looking directly into the laser tool.
DO NOT
use in combination with other optical instruments. Do not modify the instrument, or
make manipulations or use in other applications than those described in the manual.
DO NOT
look into the beam with optical aids, such as magnifiers, binoculars or Telescopes.
DO NOT
stare into the laser beam or direct it towards other persons. Make sure the
instrument is not set at eye level. Eye protection is normally afforded by natural aversion
responses such as the blink reflex.
DO NOT
direct the laser beam at other persons.
ALWAYS
turn the laser tool “OFF” when not in use. Leaving the laser tool “ON” increases
the risk of someone inadvertently staring into the laser beam.
DO NOT
operate the laser tool in combustible areas such as in the presence of flammable
liquids, gases or dust.
DO NOT
disassemble the laser tool. There are no user serviceable parts inside.
Disassembling the laser will void all warranties on the product. Do not modify the product in
any way. Modifying the laser tool may result in hazardous laser radiation exposure.
DO NOT
use this instrument in areas where a risk of explosion is present.
NOTE:
Since the laser beam is of the focused type, ensure you check the beam’s path over
a relatively long distance and take all necessary precautions to ensure the beam cannot
interfere with other persons.
1.
Safety
2.
Product Description
3.
Specifications
4.
Operating Instructions
5.
Calibration
6.
Maintenance and Care
7.
Warranty
User Safety
Safety
Contents
EN 60825-1
LASER RADIATION - DO NOT
STARE INTO BEAM OR VIEW
DIRECTLY WITH
OPTICAL INSTRUMENTS
CLASS 1 LASER PRODUCT
MAX OUTPUT ≤ 1 mW @ 630 - 670 nm
