Stanley Furniture 536-x3-50 BTG, Assembly Instructions Manual

Page: 10 / 45

10
Final Step in Crib Assembly
Step 5: (The final and most important) Checklist.

Inspect the crib once again to assure that all bolts are tight and that no hardware is missing. (if you
have missing hardware, contact Stanley Furniture immediately for replacement and do not use the
crib until the new hardware arrives).

Do not place the crib near a window where the child may have access to window coverings, cords or
draperies as these articles pose a strangulation hazard.

Replace the instructions in the holder provided. KEEP THE INSTRUCTIONS WITH THE CRIB.

Install the crib mattress.

Follow all the warnings on the use of this crib and all products in the crib.

CAUTION:
Any mattress used in this crib must be at least 27-1/4” by 51-5/8”
with a thickness of no less than 4 inches and not exceeding 6 inches.