ST&G USA Corporation
www.stngco.com e-mail:
2691 Saturn Street, Brea, CA 92821, USA
Tel : 1-714-524-0663 Fax : 1-714-364-8113
Room No. 609, 43, Yangsan-ro
Yeongdeungpo-gu,
SEOUL, 07270, SOUTH KOREA
Tel : 82-2-6267-8195 Fax : 82-2-6267-8199
e-01
LOT
Weight
Date of fitting
REP
Authorized Representative
MDSS GmbH
Schiffgraben 41
30175 Hannover, Germany
1) Prepare the suitable stump sock and thin sock.
2) Put on the stump sock and thin sock according to the length and perimeter of the residual limb.
3) After put on the sock(s), use both hands to slip the socket (A) over the residual limb. Then,
please stand up for adjusting the socket to the correct position and buckle up the belt to walk.
4) To reduce the crimp and pressure on the residual limb during walking, please arrange the stump
sock and thin sock evenly until there is no crease.
5) During walking, the residual limb with the socket should be a straight line when the leg appeared
to be the upright position.
Take Off:
1) Loosen the belt.
2) Remove the socket from the residual limb and sit down.
3) Take off the sock(s) for residual limb in sequence.
