5
11/18 161744
PRE-INSTALLATION INSTRUCTIONS
INSPECTION FOR SHIPPING DAMAGE
Inspect all cartons and crates for damage as soon as they arrive. If damage is noted to shipping crates or cartons or
if a shortage is found, note this on the bill of lading (all copies) prior to signing. The receiving party is responsible for
filing all freight claims with the delivering truck line.
If damage is discovered when the cabinet is uncrated, immediately call the delivering truck line and follow up the call
with a written report indicating concealed damage to your shipment. Ask for an immediate inspection of your concealed
damage item. Crating material must be retained to show the inspector from the truck line.
INSTALLATION INSTRUCTIONS
This cabinet should be uncrated, set up and installed by competent service people.
Warning!
– This cabinet uses a flammable refrigerant. Use caution with handling, moving and maintaining this
cabinet to avoid either damaging the refrigerant tubing or increasing the risk of a refrigerant leak.
Uncrating
Remove the protective covering (banding, shrink wrap, cardboard, plywood inner liners) and set aside. The cabinet is
nested on the shipping pallet with L shaped metal brackets on each side. Remove the metal brackets from the pallet and the
cabinet (screws). Using a team of assistants, slide the cabinet off the pallet.
WARNING - The cabinet has Casters installed on the base and will be unstable until all four casters are on the floor. Use
caution when sliding the unit off the pallet so the unit does not tip. Use a team of at least three to remove the cabinet from the
pallet.
Inside the cabinet you will find Shelves, Shelf Clips and a literature package.
Shelving Installation
The unit comes with Shelves and Shelf Supports. The Shelf Supports clip into the Pilaster Strips on the inside walls
of the unit and the Shelf then sits on the Shelf Supports. Four Shelf Supports are supplied for each Shelf. The Shelves
can be installed at any height to suit your needs and are adjustable in 1/2” height increments. The shelves come with
Product Identification Strips that can be attached to the front edge of the shelves. The Product Identification Strips will
accept pricing and product descriptor tags to suit your requirements.
Location
NOTICE!
The refrigeration system located at the bottom of the unit requires free air access for proper operation. Allow
a minimum of 2” between the back of the unit and the wall.
Do not locate next to heat generating equipment or in direct sunlight.
Make sure that the cabinet is level to allow for proper drainage of condensate water.
Confirm that the floor is capable of supporting the weight of the cabinet and its contents.
This unit is intended for indoor use only.
Electrical Supply
WARNING!
To prevent electrical shock and fire be sure the unit is properly grounded.
Confirm that the electrical supply has the correct voltage, frequency and current carrying capacity for the requirements
of the unit (see data plate on inside of unit). The unit should be isolated on a circuit. Do not use an extension cord to
get power to the unit. Improper installations will void the compressor warranty.
Summary of Contents for RGM23
Page 10: ...10 11 18 161744...
