7620
Signature Life Sure Stand Pole with Handles
V 4.1, October 11, 2021
7.
Unscrew
BOLTS
in
G
with
J
and position to desired location on
E
. Retighten
BOLTS
as shown in
FIGURE 7
.
FIGURE 7
8.
This step is only
required
for ceilings taller
than 10’ or if angled. If your ceiling is angled, go to
Step 9
first.
Secure with screws (
L
) as shown in
FIGURE 8,
making sure that
L
goes through the
CEILING JOISTS.
If the
Floor
is
ceramic or concrete, drill holes first.
FIGURE 8
9.
IMPORTANT: For angled ceilings remove
PIVOT ISOLATOR
and reassemble as shown in
FIGURE 9
. Go to
Step 8
to
finish assembly. (Tools not provided)
FIGURE 9
