L54 Tinted Lens – Manual
WAM454TintedA
5
Standby AB – standbygroup.se
5. Within 1 to 6 sec: temporarily connect the white wire to ground and let it stay connected for at
least 2 sec.
The lamp enters configuration mode and a flash sequence indicating the current settings starts.
Note
If this step is performed incorrectly, you must restart from step 2.
6. Count the number of bright flashes per flash sequence to find out the current sync mode setting.
7. Temporarily connect the blue wire to ground to change to the next version of sync mode. Each time
the blue wire is temporarily connected to ground the next version of sync mode is selected.
8. To change the flash pattern setting, see Flash Pattern. To reset to factory settings, see Factory
Reset.
9. Disconnect the power supply to save the selected settings and exit configuration mode.
!
