Standard PF-P330 Operator'S Manual Download Page 6 | Manualshive

Page: 6 / 58

background image

4

Safety Precaution

Safety precautions are indicated in this manual as follows:

The term WARNING indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.

Meaning of the Symbols

This symbol indicates there is a note which is important notandum when operating
this machine. Follow the note for safe operation.

This symbol indicates there is a prohibited action when operating this machine.

Do not perform the prohibited action.

This symbol indicates there is an essential procedure when operating this machine.

Follow the procedure for safe operation.

WARNING

CAUTION

Be careful for the Electrical Shock.

Ex-
ample

Do not dismantle.

Safety Precautions

The term CAUTION indicates a potentially hazardous situation which, if not avoided,
could result in damage to the machines. It may also be used to alarm against unsafe
practices.

- Please read and understand all safety instructions which include the term WARN-
ING and CAUTION. If these safety instructions are ignored, personal injury may
result.
- Horizon International Inc. cannot anticipate every possible situation that might
involve a potential hazard. The instructions in this manual and warning labels on the
machine are therefore not all-inclusive.
- All equipment shall be locked out or tagged out to protect against accidental or
inadvertent operation when such operation could cause injury to personnel. Do not
attempt to operate any switch, valve, or other energy isolating device when it is
locked or tagged out.
- Do not operate the machine when any covers are removed.
- Some of the drawings in this manual show the machine uncovered to help in ex-
plaining the details inside the machine.

Ex-
ample

«
...
4
5
6
7
8
...
»

Summary of Contents for PF-P330



























































Reviews:

No comments

Related manuals for PF-P330

ThermaBind T500Pro

Brand: GBC Pages: 38

Brand: Reliable Pages: 44

Brand: Unicorn Pages: 18

KM 150/500 R D 4W

Brand: Kärcher Pages: 420

Brand: Consew Pages: 54

Brand: Viruserv Pages: 6

Brand: Radio Shack Pages: 20

Brand: Lavorwash Pages: 21

Brand: SandenVendo Pages: 57

Brand: Hitachi Pages: 32

Brand: Hitachi Pages: 48

Brand: Hitachi Pages: 148

Brand: Hitachi Pages: 220

Brand: Hitachi Pages: 16

Brand: JUKI Pages: 56

Brand: Chauvet Pages: 11

HAT TRICK NG1015H

Brand: Carmelli Pages: 8

Brand: ZOJE Pages: 35

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands