(LCD display in the
vibration mode)
If you want to change the activation mode from vibration
to beep(melody) mode, press the function button until
“Tone On?” displays and then press the function button
to set the beep(melody) mode.
(LCD display in the
beep mode)
(LCD display in the
melody mode)
9
1. The usage of Nixxo-Bantam
The selection of activation mode
Beep or Melody mode: If you press the function button,
the lamp will be on. If you press the function button one
more time,
the LCD will be
displayed as below.
If you press the function button again at this time, the
pager is on vibration mode.
I
nstructions on Nixxo Bantam Functions
8
