background image

Installation guide

FLUO LED

120 V

PC-01-6

ETE-01

LEDT5-5W

LEDT5-8W

LEDT5-10W

LEDT5-12W

LEDT5-15W

LEDT5-20W

LEDT5-25W

300-350lm

480-560lm

600-700lm

720-840lm

900-1050lm

1200-1400lm

1500-1750lm

5W

8W

10W

12W

15W

20W

25W

INSTRUCTIONS FOR LED 120V T5 TUBES

See reverse side for more instructions

Sold separately: 1.8 m (6’) power cord

Approved for installation inside, under or over cabinets, with light shining in any directions

Install the brackets on a straight line

Push fixtures in brackets until a “click” is heard, then connect the power cord to fixture

Plug others fixtures directly with the included end-to-end connector or with the extension

cords. 

Linears can be directly connected on to junction box, or be used with an extension cord.

Lumen

per fixture

Total

consumption

Dimmable with most regular low voltage electronic dimmers

67202

Sold separately: 1.8m (6') power cord

INSTALLATION – STEPS

Turn OFF the power before proceeding with the installation. 

PLUG-IN INSTALLATION

1.  Attach the power cord to the "INPUT" receptacle on one end of the luminaire. Do not force connection, it 

should snap in easily.

2. Plug the power cord into the power supply.  

3. Refer to the ‘Surface Mount’ section for the following steps. 

HARDWIRE INSTALLATION 

The Hardwire Box is required (sold separately - 67261)

Connection guide provided with the hardwire box

PC-01-6

ETE-01

LEDT5-5W

LEDT5-8W

LEDT5-10W

LEDT5-12W

LEDT5-15W

LEDT5-20W

LEDT5-25W

300-350lm

480-560lm

600-700lm

720-840lm

900-1050lm

1200-1400lm

1500-1750lm

5W

8W

10W

12W

15W

20W

25W

INSTRUCTIONS FOR LED 120V T5 TUBES

See reverse side for more instructions

Sold separately: 1.8 m (6’) power cord

Approved for installation inside, under or over cabinets, with light shining in any directions

Install the brackets on a straight line

Push fixtures in brackets until a “click” is heard, then connect the power cord to fixture

Plug others fixtures directly with the included end-to-end connector or with the extension

cords. 

Linears can be directly connected on to junction box, or be used with an extension cord.

Lumen

per fixture

Total

consumption

Dimmable with most regular low voltage electronic dimmers

Reviews: