Standard Pump SPFP15, Service & Operating Manual, Page: 11 / 13

spfp15-rev0913
Model SPFP15 Food Processing •
8
www
.
standardpump
.
com
Composite Repair Parts List
Notes:
1.) (4) 200-427 o-rings are to be used with metallic fitted seats.
Air Valve Assembly
Item # Qty. Description Part Number
1 - Valve Body Assembly (includes items 2-7) 200-298
2 1 Valve Body 200-299
3 2 End Cap 200-318
4 2 End Cap Gasket 200-315
5 1 Valve Body Gasket 200-300
6 1 Valve Spool 200-311
7 3 Glyde Ring Assembly 200-312
8 12 Mounting Screws 200-326
Center Section Assembly
Item # Qty. Description Part Number
9 1 Center Block Assembly (Includes item 13) 200-302
10 2 Air Chamber 200-295
11 2 Air Chamber Gasket 200-297
12 8 Bolt 200-303
13 2 Main Shaft O-Ring 200-272
14 1 Pilot Shaft 200-316
15 5 Pilot Spacer 200-274
16 6 Pilot O-Ring 200-275
17 2 Pilot Ring 200-317
18 2 Pilot Retainer 200-314
19 2 Screw 200-324
20 2 Stop Nut 200-276
21 1 Muffler 200-422
Diaphragm Assembly / Elastomers
Item # Qty. Description
Part Number
Model SPFP15NPS Mode SPFP15NPT
22 1 Main Shaft 200-296 200-296
23 2 Main Shaft Stud N/A N/A
24 2 Diaphragm (See Below Material Chart) 200-386 200-385
25 2 Back-Up Diaphragm N/A N/A
26 2 Inner Diaphragm Plate 200-384 N/A
27 2 Outer Diaphragm Plate 200-378 N/A
28 4 Valve Seat 200-387 200-340 (See Note 1)
29 4 Valve Ball 200-389 200-388
Wet End Assembly
Item # Qty. Description Part Number
30 2 Water Chamber 200-335
31 2 Discharge Manifold 200-336
32 1 Suction Manifold 200-337
33 4 Large Clamp Half 200-329
34 4 Large Clamp Bolt 200-334
35 4 Large Clamp Wing Nut 200-270
36 8 Small Clamp Half 200-338
37 8 Small Clamp Bolt 200-339
38 8 Small Clamp Wing Nut 200-271
3: EXP
VIEW