Model SPXX30 Performance Chart
44
3A4552A
FCD-0645 Rev2
Page
2
of
2
ANNEX 1 TO DECLARATION OF COMPLIANCE
References and Regulations Used
All Materials:
Framework Regulation (EC) No 1935/2004 of the European Parliament and of the Council of 27 October 2004 on materials
and articles in tended to come into contact with food and repealing Directives 80/590/EEC and 89/109 EEC
Commission Regulation (EC) No 2023/2006 of 22 December 2006 on good manufacturing practices for materials and
articles intended to come into contact with food
Metals and Alloys:
Technical Document – Guidelines on Metals and Alloys Used as Food Contact Materials (09.03.2001)
Plastics:
Commission Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food
Commission Regulation (EU) No 1282/2011 amending and correcting Commission Regulation (EU) No 10/2011 on plastic
materials and articles intended to come into contact with food
Rubber and Elastomers:
Council of Europe Committee of Ministers Resolution ResAP(2004)4 on rubber products intended to come into contact with
foodstuffs
US Food and Drug Administration 21 CFR Ch.1 Title 177.26 Rubber Articles Intended for Repeated Use.
ANNEX 2 TO DECLARATION OF COMPLIANCE
Analysis of Materials Subject to Limitations
The following wetted parts have special conditions for use and are therefore subject to the following limitations.
Part No
Description
Limitation
400-071
EPDM Diaphragm
Migration testing only done at these conditions: 5 minutes, 40°C, fatty
simulants. Results at other conditions are unknown.
400-072
Overmold Diaphram
Contact not to exceed 24 hrs when temps are above 85
ࣙ
C
All wetted parts and/or materials used in this product have not been tested under all conditions using all simulants. It is the
responsibility of the end user to assure compliance under the specific conditions used by the end user.
ANNEX 3 TO DECLARATION OF COMPLIANCE
Other Items Used to Establish this Declaration
None
Date:
05 DEC 2016
Part Number:
Rev
199631
A