VLH-3000
Page 5
4 INSTALLATION
4.1 Optional MMB-84 Flush Mount Installation
1. To assist in flush mounting, a template has been included. Use this tem-
plate to find the mounting location.
2. Use the template to mark the location where the rectangular hole is to be
cut. Confirm the space behind the dash or panel is deep enough to ac-
commodate the
VLH-3000
(at least 4.5 inches or 11.5 cm deep).
There should be at least 1/2 inch (1.3 cm) between the
VLH-3000
’s
heatsink and any wiring, cables or structures.
3. Cut out the rectangular hole and insert the
VLH-3000
.
4. Fasten the brackets to the sides of the
VLH-3000
with the lock washer
nut combination; so that the mounting screw base faces the mounting
surface (see Figure 1).
5. Turn the adjusting screw to adjust the tension so that the
VLH-3000
is
tight against the mounting surface.
Figure 1. MMB-84 Flush Mount Installation
Bracket
Adjusting Screw
Lock-washer nut combination
Summary of Contents for VLH-3000
Page 15: ...VLH 3000 Page 15 MEMO ...
Page 23: ...VLH 3000 Page 23 MEMO ...
