3
SSM-71H Instruction Manual
Note
: Position your mouth about 1/2” (1.5 cm) away from the microphone hole and
speak in a normal voice.
⑦
◄
/
►
key
Press these keys to switch the function menu.
Secondary use:
While the MENU screen is displayed, press the key to slide the on-screen menu to the
right/left side.
⑧
MENU
key
Press this key to access the MENU.
⑨
CH▼
/
CH▲
key
These keys are used to change the operating channel.
Press the key momentarily, the channel increases/decreases one step. Holding the key,
the channel increases/decreases continuously.
Secondary use:
While the MENU screen is displayed, press the key to slide the on-screen menu
upward/downward.
When in the PA or Fog mode, press the key to change the channel.
⑩
Display
222 by 162 pixels full dot matrix display.
⑪
Soft keys
These three programmable keys can be customized through the setup menu mode.
When pressing one of these keys briefly, the key functions will appear at the bottom of
the display.
⑫
Strobe Light
When the
[STROBE]
soft key is pressed, the internationally-recognized Morse Code
“S.O.S” message will light and flash repeatedly.
From MENU → SETUP → CONFIGURATION → STROBE LED, you can select one
option from “CONTINUOUS”, “SOS”, “BLINK 1”, “BLINK 2” and “BLINK 3”.
⑬
16/S
key
Pressing this key immediately recalls channel 16 from any channel location. Holding
down this key recalls the SUB channel (The default setting is channel 9). Pressing this
key again reverts to the previous selected working channel.
⑭
Speaker
The internal speaker is located here.
⑮
DISTRESS
key
This key is used to send a DSC distress call.
⑯
USB
jack
Use the micro USB type B jack for
SSM-71H
(
RAM4W
) battery charge.
Note: When the DATA jack is securely covered with rubber cap, the SSM-71H meets
the waterproofing performance.
Application for FCC / IC
FCC ID: K660A290X10 / IC: 511B-0A290X10
