p a g e 7
Owner’s Manual
GX2350S
A/B Key
Immediately recalls two user assigned channels from any channel.
CALL/SET Key
The CALL/SET key functions as the enter key.
Secondary use
Press the CALL/SET key to access the DSC OPERATION menu. The
following DSC functions can be accessed from the DSC OPERATION
menu; INDIVIDUAL, ALL SHIPS, STANDBY, CALL WAIT and POS
REQUEST.
Press and hold the CALL/SET key to access the SETUP menu. The
following functions can be accessed in the SETUP menu; LAMP ADJUST,
CONTRAST, INDIV DIR, POS REPLY, SCRAMBLER, KEY BEEP, TIME
SET, USER MMSID.
H/L Key
Toggles between high and low power. When the H/L key is pressed
while the transceiver is on channel 13 or 67, the power will temporarily
switch from LO to HI power until the PTT is pressed. The H/L key does
not function on transmit inhibited and low power only channels.
NAV / IC Key
1. Pressing this key, when connected to the GPS receiver, the LCD
displays position data, Date, Time, Ground Speed and Heading
from the GPS.
2. Press and hold down this key, when the optional RAM Mic
connected. Intercom operation will operate between radio and RAM
Mic.
r
CHANNEL SELECTOR KNOB
Rotary knob used to select channels and, to choose the item selection
of different functions (DSC operation, PA/FOG operation and etc.). The
CH key on the microphone can also be used to select them.
Secondary Use
While holding down the SCAN Key and rotating the rotary knob, you
can confirm memory channels for scanning.
t
RAM MIC CONNECTOR
Connects the Remote Access Microphone (RAM MIC). Refer to
“section 8.0, (RAM MIC OPERATION).
