Standard Horizon QUANTUM GX6000E, Owner'S Manual

Page: 137 / 194

Page 137 GX6500E/GX6000E
4. Rotate the DIAL/ENT knob to select “ DEVICE
INSTANCE ”, then press the [SELECT] soft key.
5. Rotate the
DIAL/ENT
knob to select the first digit of
the device number, then press the
[SELECT]
soft key
to step to the next number.
6. Repeat step 5 to set the device number within the
range of 000 to 251. (“ 000 ” is default).
7. If a mistake was made entering in the device number, rotate the DIAL/ENT
knob to select “←” or “→”, press the [SELECT] soft key until the wrong
character is selected, then perform step 5.
8. When finished programming the device number, press
the [FINISH] soft key.
9. Press the CLEAR key to return to radio operation.
13.3 SYSTEM INSTANCE
Set the system number of the device selected in “ 14.1 SELECT DIVICE ”.
1. Press the MENU key to display “ MENU ”.
2. Rotate the DIAL/ENT knob to select “ SETUP ”, then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select “ NMEA 2000
SETUP ”, then press the [SELECT] soft key.
4. Rotate the DIAL/ENT knob to select “ SYSTEM
INSTANCE ”, then press the [SELECT] soft key.
5. Rotate the
DIAL/ENT
knob to select the first digit of
the system number, then press the
[SELECT]
soft
key to step to the next number.
6. Repeat step 5 to set the system number within the
range of 00 to 15. (“ 00 ” is default).
7. If a mistake was made entering in the system number, rotate the DIAL/ENT
knob to select “←” or “→”, press the [SELECT] soft key until the wrong
character is selected, then perform step 5.