Standard Horizon PF-P320, Operator'S Manual

Page: 20 / 46

2. Operation Procedure
14
3.
After following "3-1 Operation Proce-
dure: steps 1 to 6 (pages 12 and 13),
select fold pattern with fold pattern
select button.
4.
Open function switch cover.
5.
Select set up mode "Set Stopper 1" with
mode select button.
6.
Input required sizes which measure it in
step 2 (pages 14 and 15) with number
entry key.
- The size unit is "mm."
NOTE
- The stopper 1 input range is from 50 to 325
mm. If the input figure is out of the range,
the message "000.0 Set Stopper 1" will be
indicated on LCD.
- If it takes two seconds or more to input size,
the message "000.0 Set Stopper 1" will be
indicated on LCD again. Input folding size
with number entry key once again.
Function Switch Cover
2-2 Irregular Size Sheet Folding.
STOPPER
POSITION
STOPPER 1
HOW TO MEMORIZE
1. Select folding patterns.
2. Press MODE button to show "Set Stopper 1."
3. Input required length with number keys.
4. Press ENTER button to input size in Memory 1 or 2.
ENTER
MODE
Number
Entry Key
1 0 0 . 0 S e t S t o p p e r 1
ABC
ABC
ABC
ABC
ABC
ABC Select