MLS-410PA / MLS-410SP
Typical Radio Connections
Red*
Black*
Sheild
White
Fuse
*(MLS-410PA only)
Fuse
Red
Power Source
Black
Accessory
Cables
z
MLS-410PA / MLS-410SP with Radio
Route and secure the connection cables from the speaker to the
Marine VHF Radio.
Wire Color
Connection
White - Speaker (+)
White wire of accessory cables
Shield - Speaker (−) Shield of accessory cables
Red - Positive (+)*
12VDC positive (capable of supplying 1.5A of current)
Black - Negative (–)* 12VDC negative
*(MLS-410PA only)
z
MLS-410LH / MLS-410SP with VLH-3000A
For connections, refer to the VLH-3000A instruction manual.
Disposal of Electrical and Electronic Equipment
Products with the symbol (crossed-out wheeled bin) cannot be disposed of as household waste.
Electronic and Electrical Equipment should be recycled at a facility capable of handling these items and their waste byproducts.
Please contact a local equipment supplier representative or service center for information about the waste collection system in your country.
106 mm
106 mm
95
∅
5 .2
∅
TEMPLATE
Use this template to mark the location
where the round hole for the flush mount
is to be cut.
Operation
1. Before connecting the speaker to the radio, turn the radio ON and set the AF volume level to minimum.
2. Turn the radio OFF, then connect the speaker to the radio.
3. Rotate the MLS-410PA volume knob to “12 o’clock” position. (MLS-410PA only)
4. Turn the radio ON and adjust the VOL knob on the radio to a comfortable listing level.
5. After adjusting the volume on the radio, you may adjust the MLS-410PA volume or turn off the speaker using the volume knob.
(MLS-410PA only)
6. To call the VLH-3000A, press the MLS-410LH PTA button. A calling beep will be heard on the VLH-3000A with an indication of the
intercom station (IC1 or IC2). (MLS-410LH only)
Connections
