Owner’s Manual
MD150 User Manual
Page 5
4 Installation
4.1 Location
The MD150 is designed for above or below deck
installation. Select a position that is:
•
At least 12 inches (300mm) from a compass
•
At least 20 inches (500mm) from any radio
•
Easy to read by the helmsman and crew
•
Protected from physical damage
•
Accessible to electrical cable connections
4.2 Mounting
The mounting surface must be flat. Use the template
to set the center of the fixing hole.
1
Drill a 1.25" (32mm) diameter mounting hole
through the bulkhead.
2
Remove the nut. Peel the protective paper
off the foam gasket and attach the gasket to
the rear of the instrument.
3
Insert the instrument through the bulkhead.
Hand tighten the nut, do not over tighten so
that the water sealing ability of the gasket is
damaged.
3 Accessories
3.1 Optional
SIA51 ........................................................................................ Transom Mount Impeller with 30-foot cable
SIA53 ....................................................................................................................... Thru-hull Speed Impeller
EX345 ........................................................................................................ 15-foot Impeller Extension Cable
EX345D ................................................................................................ 15-foot Transducer Extension Cable
DST50 .............................................................................................................. 2 inch low profile Transducer
DST51 ................................................................................................................ Transom Mount Transducer
DST52 ............................................................................................. Bronze Long Stem Thru-hull Transducer
DST53 .................................................................................................. 2 inch Bronze low profile Transducer
DST55 ..................................................................................................................... In-hull Depth Transducer
FB52 ........................................................................................................................ Fairing block for DST52
3.2 Replacement Parts
The following parts may be ordered from the STANDARD HORIZON Parts Department.
To order, call: 562-404-2700 Ext 351
Part ........................................................................................................................................... Part Number
Dummy Plug, SIA53 .................................................................................................................. 356002017A
Dust Cover .......................................................................................................................................... DC150
Flapper Valve, SIA53 ................................................................................................................. 596001019A
Paddlewheel Repair Kit, SIA51 .................................................................................................. 602002022A
Paddlewheel Repair Kit, SIA53 .................................................................................................. 602005009A
Thru-hull Fitting, SIA53 .............................................................................................................. 590170123A
Impeller Nut, SIA53 .................................................................................................................... 590170123A
Panel Gasket .............................................................................................................................. 108013023A
SIA53 / DST50 Mounting Nut ..................................................................................................... 580001027A
DST51 Mounting Bracket ........................................................................................................... 160001022A
SIA51 Mounting Bracket .............................................................................................................. 16002022A
