Standard Horizon HX760S Owner'S Manual Download Page 13

Page: 13 / 56

Page 13

HX760S

4.1.3 BATTERY CHARGING

1. Turn the transceiver off.
2. Insert the DC plug from the

NC-

88B

into the DC jack on the

CD-

side panel, then plug the

NC-

88B

into the AC line outlet.

3. Insert the

HX760S

(with the bat-

tery pack) into the

CD-39

; the

antenna should be at the left side
when viewing the charger from
the front.

4. If the

HX760S

is inserted cor-

rectly, the Red “

CHARGING

” in-

dicator will glow. A fully-dis-
charged pack will be charged
completely in approximately 8
hours.

5. When charging is completed, the

red LED indicator will change to
green.

CAUTION

The

CD-39

is NOT designed to be waterproof. Do not attempt to charge

in water hazardous locations.

NOTE

The

CD-39

is only designed for the charging of the

HX760S

’s battery,

and is not suitable for other purposes. The

CD-39

may contribute noise

to TV and radio reception in the immediate vicinity, so we do not recom-
mend its use adjacent to such device.

NC-88B

CD-39

Summary of Contents for HX760S

























































Search results

Summary of Contents for HX760S

Reviews:

Related manuals for HX760S

Brands by name

Popular brands

Standard Horizon HX760S, Owner'S Manual

Search results

Summary of Contents for HX760S

Reviews:

Related manuals for HX760S

Brands by name

Popular brands