Page 25
HX300E
been selected to the scan channel.
4. Repeat step 3 for all desired channels to be programmed into scan mem-
ory.
5. To DELETE a channel from the scan memory, select the channel by
pressing the
or
key, then press the
key. The “ ” icon disap-
pears from the display.
6. When you have completed programming scan memory, turn the trans-
ceiver off and on by press and holding the
key.
6.7.2 SELECTING SCAN TYPE
1. Turn the transceiver off by press and holding the
key.
2. Hold down the key, and then turn on the transceiv-
er while still holding down the key.
3. “
” icon will appear on the display, indicating the
Menu (“Set”) Mode has been activated.
4. Press the key until “
SC
” is shown in the bottom
right of the display.
5. Press the
or
key to select “
PS
(Priority Scan)”
or “
MS
(Memory Scan)”. The factory default is “
PS
(Priority Scan)”.
Priority Scan: Scans the Scan Memory Channel,
Preset Channel, and the Priority
Channel (Channel 16).
Memory Scan: Scans the Scan Memory and chan-
nels programmed into the Preset
Channel memory.
6. After completing your selection, turn the transceiver
off and on by press and holding the
key.
M
eMory
S
can
P
riority
S
can
