Standard Horizon HX300 Page 47 Owner'S Manual Download

Page: 47 / 48

Page 47

HX300

This device complies with part 15 of the FCC rules. Operation is sub-

ject to the condition that this device does not cause harmful interfer-

ence.

Part 15.21: Changes or modifications to this device not expressly

approved by YAESU MUSEN could void the User’s authorization to

operate this device.

13. FCC NOTICE

NOTICE

Unauthorized changes or modifications to this equipment may void

compliance with FCC Rules. Any change or modification must be

approved in writing by STANDARD HORIZON, a division of YAESU

USA.

NOTICE

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.



Consult the dealer or an experienced marine electronics techni-

cian for help.

CAUTION

This device is intended for general population use to satisfy FCC RX

exposure compliance. See section “

1.2 SAFETY INFORMATION

” for

specific operating requirement.

Summary of Contents for HX300

















































Search results

Summary of Contents for HX300

Reviews:

Related manuals for HX300

Brands by name

Popular brands

Standard Horizon HX300, Owner'S Manual

Search results

Summary of Contents for HX300

Reviews:

Related manuals for HX300

Brands by name

Popular brands