Page 47
GX1600
9.5.5.2 Individual Call by Manually Entering a MMSI
You may enter an MMSI number manually to contact another vessel.
1. Press the
key. The “
DSC Menu
” menu will ap-
pear.
2. Press the
/
key to select “
INDIVIDUAL
”. (To
cancel, press the
soft key.)
3. Press the
soft key.
NOTE
If you have transmitted a Individual call be-
fore, the radio will show the name of the last
person you called as shown in the display at
the right. If this is the case press the
soft key and the following steps.
4. Press the
/
key to select “
MANUAL
”, then
press the
soft key.
5. Press the
/
key to select the first number
of the MMSI which you want to contact, then press
the
soft key to step to the next number.
6. Repeat step 5 to set the MMSI number (nine digits).
7. If a mistake was made entering in the MMSI num-
ber, repeat pressing the
soft key until the
wrong number is selected, then press the
/
key to correct the entry.
8. When finished entering the MMSI number, press and
hold the
soft key.
9. Press the
soft key, then press the
/
key to select the operating channel you want to com-
municate on, then press the
soft key. If the
channel is not shown in the list, press the
soft key, then press the
/
key to select the
operating channel you want to communicate on, then
press the
soft key.
10. Press the
soft key to transmit the individual
DSC signal.
11. When an individual call acknowledgment is received,
the established channel is automatically changed
to the channel which is selected on step 5 above
and a ringing tone sounds.
12. Press the
soft key to listen to the channel to
Summary of Contents for Explorer GX1600
Page 21: ...Page 21 GX1600 MEMO ...
Page 89: ...Page 89 GX1600 MEMO ...
Page 108: ...GX1600 Page 108 19 5 DIMENSIONS ...
Page 109: ...Page 109 GX1600 ...
