manualshive.com logo in svg

Standard Horizon CP150C, Owner'S Manual

Share
Download
Standard Horizon CP150C Owner'S Manual Download Page 12

  

Page 14

GPS Chart 150C

Figure 2.4a - Inserting C-CARD (II)

NOTE

Throughout this Owner's Manual, the keys are noted in Capital bold letters with
quotes, example “ENTER”. Menu operations are in Capital bold letters that are
underlined, example: ADVANCED SETUP.
For an example “MENU” + ADVANCED SETUP + “ENTER” + INPUT/OUTPUT
+ “ENTER” means:

1. Press the 

 key.

2. Use the ShuttlePoint knob 

 to select the ADVANCED SETUP menu item.

3. Press the 

 key.

4. Use the Shuttlepoint 

 to select the INPUT/OUTPUT menu item.

5. Press the 

 key.

2.5 CONTROLS AND INDICATORS

NOTE

This section defines each control of the chart plotter. For instructions, refer to
Getting Started and Advanced Operation sections of this Owner's Manual.

2.5.0 Controls and Connections

The chart plotter is controlled by using the 10 keys located on the front panel of the
CP150C. There is also a ShuttlePoint knob to move the cursor across the screen. As

Summary of Contents for CP150C









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands