V1.0
RUNGU Electric Juggernaut Mid-Drive Version (MDV) User Manual
–
2018 model year
Copyright 2018 Standard Bearer Machines, LLC
34
Using the Motor and Light Control keypad and Understanding the Display
The MDV comes with a display and keypad that differs from other manufacturers using Bafang BBSHD
motors due to the higher voltages of the MDV. The keypad has the on and off switch for the MDV,
controls the power output level of the motor, turns the (optional) Rungu E-Light on and off, and sets up
the Display. This section provides an overview of the controls that gives you enough information to
operate your MDV. For detailed instructions refer to the document “
Rungu Electric Juggernaut Mid-
drive Version Display User Guide
”
, which is available on your USB document drive.
Turning on the MDV
Press and hold the on/off switch for one to two seconds. The Display will show a start-up screen and
then show the dashboard in red
–
Rungu defaults the MDV to Sport Mode.
Reading the MDV Display
When the display is on, it acts as the dashboard for the MDV showing all the motor and battery
information at any time. This section describes each of the display elements at a high-level. For
detailed information refer to the “
Rungu Electric Juggernaut Mid-drive Version Display User Guide
”
document in the USB document drive that accompanied this MDV.
