5
Lubricate moving parts regularly.
Clean the product with a dry or damp cloth only and do not use special cleaning agents!
Check the product for damage or traces of wear and tear before and after each use.
Store the product in a safe place where it is protected from the elements so that it
cannot be damaged.
BEARINGS
Your scooter is equipped with precision ball bearings which were filled with lubrication at
high pressure during manufacture. For this reason, the wheels can only run easily and
quickly when there is a load on the scooter. The bearings are maintenance free. If a
bearing should fail, it should be completely replaced.
WHEEL CHANGE
Wheels should be replaced when they get worn down.
To change the wheels, loosen the axle fitting with two size 5 Allen keys and remove the
wheels from the axle. A screwdriver or Allen key can be used to push the bearings out
of the wheel in order to use them again in the new wheels. However, it is usually advisable
to change the bearings when the wheels are being changed. Put the bearings into the new
wheel with the spacer sleeve and mount them to the frame with the axle screws. Make
sure that the axle has been screwed on tightly before starting again!
DISPOSAL ADVICE
At the end of the product‛s life, please dispose of it at an appropriate collection
point in your area
V2017-03-28
Summary of Contents for stunt JB246
Page 1: ...V2017 03 28 stunt scooter series...
Page 2: ...1 stunt scooter series 1 2 3 4 5 V2017 03 28...
Page 17: ...V2017 03 28...
