Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance
1 (800) 375-7520
or e-mail us at:
6
ASSEMBLY INSTRUCTIONS
Sensor Wire
STEP 1
NOTE:
The
LEFT UPRIGHT(2)
is the one with the Sensor Wire.
Attach the
LEFT
and
RIGHT UPRIGHTS(2, 3)
to the
UPRIGHT SUPPORT(4)
with
HEX BOLTS
(M10 x 20mm)(38)
and
WASHERS(M10)(47).
STEP 2
Slide the
SPRING(7)
onto the
SPRING PIN(6).
Insert the threaded end of the
SPRING PIN(6)
through
the collar on the
RIGHT UPRIGHT(3)
and screw the
BALL KNOB(8)
onto the thread end of the S
PRING
PIN(6).
Tighten the
BALL KNOB(8)
as tight as you can by hand.
