ASSEMBLY INSTRUCTIONS
STEP 4
Insert the
UPRIGHT(68)
into the
MAIN FRAME(1)
and secure with
BUTTON HEAD BOLTS
(M8x1.25x16mm)(59)
and
ARC WASHERS(M8)(77).
STEP 5
Insert the
HANDLEBAR POST(71)
into the
UPRIGHT(68),
and lock it in one of the adjustment holes with
ADJUSTMENT KNOB(69).
NOTE:
There are three adjustment holes on the
HANDLEBAR POST(71)
for adjusting the height of the
HANDLEBAR(72).
STEP 6
Refer to the detail view A.
Note the correct position of the
HANDLEBAR(72),
the
HANDLEBAR(72)
should be assembled with a six degrees angle forward than the
HANDLEBAR POST(71).
Attach the
HANDLEBAR(72)
to the
HANDLEBAR POST(71)
with
HEX BOLTS(M6x1x33mm)(75), ARC
WASHERS(M6)(76),
and
NYLOCK NUTS(M6x1)(49).
The
HEX BOLTS(M6x1x33mm)(75)
fit inside the
hex-shaped holes in the
HANDLEBAR POST(71).
8
hex-shaped
hole
A.
Summary of Contents for InMotion E3000
Page 14: ...PRODUCT PARTS DRAWING 14 FRONT BACK...
Page 18: ...NOTES 18...
