ADJUSTMENT INSTRUCTIONS
Chain Adjustment
Chain Adjustment required if the Chain is too loose.
Loosen the
NUTS(3/8")(66)
on both sides of the fan.
Adjust the
NUT(M6)(65)
on the chain side of bike to remove
all slack from the chain.
Adjust the
NUT(M6)(65)
on the side opposite the chain so
that the center of the
NUT(3/8")(66)
is the same distance
from
TAB
on both sides of bike.
Tighten the
NUTS(3/8")(66)
on both sides of the fan.
1.
2.
3.
4.
TAB
15
Fan Adjustment
Fan Adjustment is required if the fan locks up or the resistance of the fan increases after use. To
adjust the fan, use the following procedures:
It is best to lift the front of the frame and remove the fan and fan cages thru the bottom
of the bike.
Remove both pedals.
Remove the
SCREWS(52, 54, and 55)
holding the
CHAIN GUARDS(29, 30)
and
FAN
CAGES(28)
to the
BIKE.
Remove the
CHAIN GUARDS(29, 30).
HINT :
The
CRANK(10)
should be pointing down.
Remove the
NUTS(3/8")(66), EYE BOLTS(22),
and
NUT(M6)(65)
from the
FAN AXLE(21).
Slide the
FAN(18)
towards the
REAR
and slide
CHAIN(17)
off both the
FRONT
and
REAR
SPROCKETS.
Unhook the
TENSION STRAP(25)
from the
FRAME(1).
Remove the
FAN(18)
and
FAN
CAGES(28)
from the bike.
HINT
:
STEP 1:
STEP 2:
STEP 3:
STEP 4:
STEP 5:
