background image

15

1.  To store the 

AVARI® Magnetic Elliptical,

 simply keep it in a clean dry place.

2.  The  minimum  rest  dimensions  of  the 

AVARI® Magnetic Elliptical

  are  approximately  39.8  inches 

long x 22 inches wide x 59.8 inches tall. These dimensions may vary. Please measure your 

AVARI® 

Magnetic Elliptical

 if exact dimensions are needed.

3.  Lift the 

AVARI® Magnetic Elliptical

 from the Pivoting Shaft area and 

REAR STABILIZER(2)

 to move. 

Two people are required to move the 

AVARI® Magnetic Elliptical.

4.  To  avoid  damage  to  the  electronics,  remove  the  batteries  before  storing  the 

AVARI® Magnetic 

Elliptical

 for one year or more.

STORAGE

The safety and integrity designed into the 

AVARI® Magnetic Elliptical

 can only be maintained when 

the 

AVARI® Magnetic Elliptical

 is regularly examined for damage and wear. Special attention should 

be given to the following:

MAINTENANCE

1.  Adjust the 

TENSION KNOB(8)

 and verify that it functions properly and the resistance changes.

2.  Verify  that  all  nuts  and  bolts  are  present  and  properly  tightened.  Replace  missing  nuts  and  bolts. 

Tighten loose nuts and bolts.

3.  Verify that the 

WARNING LABEL(78)

 is in place and easy to read. Call Stamina Products immediately 

at 

1-800-375-7520

 for a replacement 

WARNING LABEL(78)

 if it is missing or damaged.

4.  It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.

5.  Worn  or  damaged  components  shall  be  replaced  immediately  or  the 

AVARI® Magnetic Elliptical 

removed from service until repair is made.

6.  Only Stamina Products supplied components shall be used to maintain/repair the 

AVARI® Magnetic 

Elliptical.

7.  Keep your 

AVARI® Magnetic Elliptical

 clean by wiping it off with an absorbent cloth after use.

Summary of Contents for AVARI A550-090
























Reviews: