STEP 5
Remove the paper covering from the foam tape inside the
FRONT COVER(7)
and
REAR COVER(8).
Place
the
FRONT COVER(7)
over the
FRONT FRAME(1).
Place the
REAR COVER(8)
over the
REAR FRAME(2).
Press the covers securely in place.
NOTE:
8
ASSEMBLY INSTRUCTIONS
The securing
SCREWS(M6x1x35mm)(42)
for the
PULLEY ASSEMBLY(26)
on each side may
need to be loosened to allow the
REAR COVER(8)
to fit securely over the frame. Refer to the inset
drawing
A.
When retightening the screws for the
PULLEY ASSEMBLYS(26)
do not over tighten.
The
PULLEY ASSEMBLYS(26)
should move freely.
STEP 6
Refer to the above illustration. Make sure that the threaded holes in
the
FOOT REST(10)
are facing toward the end of the
AeroPilates
Performer XP615
as shown. Insert the
FOOT REST(10)
into the
mounting holes located in the
FRONT COVER(7)
and
FRONT
FRAME(1).
Insert the
FOOT REST(10)
all the way to the bottom and
lock it in place with the
LOCKING KNOBS(55).
NOTE:
You can choose to insert the
CARDIO REBOUNDER(56)
into
the
FRONT FRAME(1)
and lock in position with the
LOCKING
KNOBS(55).
Refer to the inset drawing
B.
A.
B.
