Button
A.
STEP 4
NOTE:
ASSEMBLY INSTRUCTIONS
10
Refer to illustration A. Bolt the
PUSH-THRU BARS(27), CROSSING BAR(28),
and
HANDLEBAR(29)
together with
FLAT SOCKET HEAD BOLTS
(M6x1x20mm)(35).
Attach the
PUSH-THRU BAR ASSEMBLY
(27)
to one of the adjustment holes in the
UPRIGHTS(9)
with the
LOCKING PINS(17).
Always make sure
SAFETY CHAIN(25)
is connected with the
LINKS(24)
when the
PUSH-THRU BAR(27)
is in use.
STEP 5
NOTE:
Always use
SECURING STRAP(14)
to keep the
PUSH-THRU BAR(27)
in a secure position when
not in use.
Attach the
SECURING STRAP(14)
onto the center
EYEHOOK(21)
with the
LINK(24)
on the top of the
TOP CROSS BAR(8).
1. There are four adjustment holes in each
UPRIGHT(9)
that allow you to attach the
PUSH-THRU
BAR(27)
to four different heights.
2. Refer to the inset drawing. Push in the button on the
“T”
end of the
LOCKING PIN(17)
to release
the Steel Ball on the other end of the pin. Then you can insert the
LOCKING PIN(17)
into the
adjustment hole. Push the button to remove the pin.
