Stamina 55-9161, Owner'S Manual

Page: 14 / 23

1. Rechargeable batteries are not recommended.
NOTE:
1. Open the Battery Door on the back of the METER(39).
2. The METER(39) operates with an AA battery, the battery is not
included. Refer to the illustration to install or replace the batteries.
HOW TO INSTALL AND REPLACE BATTERIES:
Pedal movement or press any button.
Automatic shut off after four minutes of inactivity. POWER ON :
POWER OFF :
FUNCTION BUTTONS:
MODE :
RESET :
Press to select display functions, include SCAN,
TIME, COUNT, CALORIES, and TOTAL COUNT.
Press and hold for three seconds to reset all
functions to zero, except
TOTAL COUNT.
Press to reset all functions to zero, including
TOTAL COUNT.
SCAN:
TIME:
COUNT :
CALORIES:
TOTAL COUNT :
NOTE:
The meter will stop counting time automatically after four seconds of inactivity. All function
values will be kept. Restart the meter by pedal movement or press any button.
The meter will shut off automatically after four minutes of inactivity. All function values will
be kept. Press the
MODE
button and hold it down for three seconds to reset all functions
to zero, except TOTAL COUNT. Or press the RESET button to reset all functions to zero.
USING THE FITNESS METER
1.
2.
AA Battery
OPERATIONAL INSTRUCTIONS
FUNCTIONS:
Automatically scans each function of TIME, COUNT, CALORIES, and TOTAL COUNT
in sequence with change every four seconds. Press and release the MODE button until
“SCAN” appears on the display.
Displays the time from one second up to 99:59 minutes.
Displays the total number of strides you have taken from zero to 9999 strides.
Displays the calorie consumption from zero to 999.9 cal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
Displays the total accumulated number of strides you have taken from zero to 9999 strides.
SCAN TIME COUNT CAL TOTAL COUNT
D
O E
M
S E
E T
R
14