Part # Part Name
Qty
1
Front Stand
1
2
Middle Stand
1
3
Rear Stand
1
4
Connection Bar
4
5
Endcap
6
6
Pull Pin
8
7
Manual
1
LIMITED WARRANTY
Products shipped to the manufacturer must be in the original shipping carton with freight prepaid. All expenses for
repairing or replacing the product, including the cost of shipping it back to the original purchaser, will be covered by the
manufacturer. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
If the product should, for any reason, become defective within 90 days of purchase, the manufacturer will replace the product
once it is returned to the manufacturer. This warranty does not apply to any damage caused by accident, return transit,
improper assembly, alteration, abuse, or misuse. There are no other warranties other than those expressly set forth herein.
This product is warranted to be free from defects in material and workmanship and to be in perfect working order at the
time of purchase. This warranty applies to personal, family or household use. This warranty does not apply to use in
athletic clubs, health clubs, spas, gymnasiums, exercise facilities, and other public or semipublic facilities.
Assembly of The AeroPilates® Stand
Refer to the illustration above. Connect the
FRONT STAND(1)
to the
MIDDLE STAND(2)
with two
CONNECTION BARS(4)
and lock in the place with the
PULL PINS(6).
Repeat to connect the
REAR
STAND(3)
to the
MIDDLE STAND(2).
The
AeroPilates® Stand
is designed to elevate the
4 and 5 cord
AeroPilates®
reformers. Place your
AeroPilates®
reformer onto the
AeroPilates®
Stand
as shown in the illustration.
NOTE:
The feet of the
AeroPilates®
reformers must
fit into the
FRONT STAND(1)
and the
REAR
STAND(3).
The
FRONT STAND(1)
is wider than
the
REAR STAND(3).
The Foot Rest end of your
AeroPilates®
reformer will fit into the top of the
FRONT STAND(1)
and the Headrest end of your
AeroPilates®
reformer will fit into the
REAR
STAND(3).
Front Stand(1)
(Wide)
Rear Stand(3)
(Narrow)
