7
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com to the Services section and order the part needed, e-mail
us at [email protected], or call us toll free at 1-800-375-7520 (in the U.S.). Our
Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday
through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Unfold the
BASE ASSEMBLY
to an upright position by moving the
FRONT FRAME(1)
away from the
REAR FRAME(2).
Then push down on the middle of the two
FOLDING LINKAGES(3)
until they are fully
locked down.
STEP 2
Slide one
PROTECTIVE COVER(21)
onto each side of the
BASE ASSEMBLY,
and pull the covers down
until the bottom of the covers are slightly lower than the
FOLDING LINKAGES(3).
Secure the
PROTECTIVE
COVERS(21)
to the
FOLDING LINKAGES(3)
with the
SECURING STRAPS
on the bottom of the covers.
NOTE:
When the
PROTECTIVE COVERS(21)
are assembled correctly, the
FOLDING LINKAGES(3)
should not be visible. Refer to the illustration.
