ASSEMBLY INSTRUCTIONS
STEP 3
Insert the two
UPRIGHTS(2)
onto the
MAIN STANDS(1).
Place a
ARC WASHER(M10)(26)
onto a
HEX BOLT(M10x1.5x130mm)(21).
Slide a
SPACER TUBE(11)
between the
UPRIGHT(2)
and the
DIP
STAND(5),
then insert the bolt through all these tubes and bolt them together with a
ARC WASHER(M10)
(26)
and a
NYLOCK NUT(M10x1.5)(23).
Repeat to assemble the other
SPACER TUBES(11)
between
the
UPRIGHT(2)
and the
DIP STAND(5).
NOTE:
When assembling the
SPACER TUBE(11),
start from the one at the lower position.
STEP 4
Attach the
PULL-UP BAR(3)
to both the
UPRIGHTS(2)
with
HEX BOLTS(M8x1.25x45mm)(20)
and
ARC WASHERS(M8)(25).
SECURELY TIGHTEN ALL OF THE BOLTS FROM STEP 1 TO STEP 4.
8
To assemble the SPACER
TUBES(11), start from the one
at the lower position.
Summary of Contents for 50-1690
Page 14: ...PRODUCT PARTS DRAWING 14 FRONT BACK ...
Page 17: ...NOTES 17 ...
