ASSEMBLY INSTRUCTIONS
12
STEP 13:
Refer to the detail view 1. Attach the
SUPPORT LEG(41)
to the
REAR SUPPORT(40)
with
HEX BOLT (M8x1.25x70mm)(29), WASHERS(M8)(37),
and
NYLOCK NUT(M8)(34).
NOTE:
Do not over tighten
HEX BOLTS(32, 57)
as the
BRACE TUBES(43, 44), BRACE SUPPORT(45),
and
CONNECTING BRACKET(46)
must be able to pivot smoothly after
HEX BOLTS(32, 57)
are
tightened.
STEP 14:
Attach the
LEFT
and
RIGHT BRACE TUBES(43, 44)
to the
REAR SUPPORT(40)
with
HEX BOLT(M10x1.5x140mm)(57), WASHERS(M10)(38),
and
NYLOCK NUT(M10)(35).
Attach
the
BRACE SUPPORT(45)
between the
LEFT
and
RIGHT BRACE TUBES(43, 44)
with
HEX
BOLT(M10x1.5x140mm)(57), WASHERS(M10)(38),
and
NYLOCK NUT(M10)(35).
STEP 15:
Attach the
CONNECTING BRACKET(46)
to the
BRACE SUPPORT(45)
with
HEX
BOLT(M10x1.5x65mm)(32), WASHERS(M10)(38),
and
NYLOCK NUT(M10)(35).
Place the
CONNECTING BRACKET(46)
on the
REAR SUPPORT(40)
and lock in place by inserting the
BALL
PIN(48)
into one of the adjustment holes.
NOTE:
There are three adjustment holes on the
REAR SUPPORT(40)
for adjusting the angle of the
Bench.
1.
Meijer.com
