10
SET UP INSTRUCTIONS
Place the
CPS 9200 Indoor Cycle
in the area where it will be used. It is recommended that the
CPS 9200
Indoor Cycle
be placed on an equipment mat. The
CPS 9200 Indoor Cycle
is approximately 50 inches
long (max.) x 18 3/8 inches wide x 42 5/8 inches tall (max.). An area 4 feet wide x 6 feet long is required for
safe operation of the
CPS 9200 Indoor Cycle.
Make sure that adequate space is available for access to and
passage around the
CPS 9200 Indoor Cycle.
Adjust the
STANDS(51)
under the
FRONT
and
REAR STABILIZER(3, 4)
so that the
CPS
9200 Indoor Cycle
sits on the floor without rocking. Refer to the instructions below the
illustration.
The
CPS 9200 Indoor Cycle
has a pair of
WHEELS(49)
on the
FRONT STABILIZER(3).
Lift
up the
REAR STABILIZER(4)
to move the
CPS 9200 Indoor Cycle.
LEVELING:
MOVING:
FUNCTION INSPECTION:
Visually inspect the
CPS 9200 Indoor Cycle
to verify that assembly is as shown in the above illustration.
Check the function of the
CPS 9200 Indoor Cycle
by turning the crank slowly through one complete revolution
to verify that the drive train functions properly. Adjust the
TENSION KNOB(34)
to verify that the adjustable
tension is working properly.
Locate and read the
WARNING LABEL(70)
on the
CPS 9200 Indoor Cycle.
Make sure that all
users read the
WARNING LABEL(70).
CAUTION:
Loosen the
NUTS(M8x1.25)(67)
until they touch
the
STANDS(51)
. Adjust the
STANDS(51)
for
leveling. Tighten the
NUTS(M8x1.25)(67)
securely against the
STABILIZERS(3, 4)
to lock
the
STANDS(51)
in position.
EQUIPMENT MAT
(not included)
Summary of Contents for 15-9200
Page 16: ...PRODUCT PARTS DRAWING 16 FRONT BACK ...
Page 20: ...20 NOTES ...
Page 21: ...21 NOTES ...
